A 60 GHz switched-line type phase shifter using body-floating switches

Muhammad Talha Gul; Hao Vinh Duong; Seong Yeon Kim; Jong Wook Lee

doi:10.1109/ISOCC.2013.6864048

A 60 GHz switched-line type phase shifter using body-floating switches

Muhammad Talha Gul
, Hao Vinh Duong
, Seong Yeon Kim
, Jong Wook Lee

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

In this study, a two-bit switched-line type phase shifter is designed and fabricated for 60 GHz phase array applications. A body-floating technique is used to reduce the insertion loss of the on-state switch while the off-state isolation is increased by the use of a resonating inductor connected across the switch. The size of the delay path in the phase shifter is reduced by adopting a lumped equivalent circuit realization. Measurements demonstrate a minimum insertion loss of 8.2 dB with an average value of 8.9 dB at 60 GHz, with a return loss smaller than 12 dB over the frequency range of 57 to 64 GHz.

Original language	English
Title of host publication	ISOCC 2013 - 2013 International SoC Design Conference
Publisher	IEEE Computer Society
Pages	353-355
Number of pages	3
ISBN (Print)	9781479911417
DOIs	https://doi.org/10.1109/ISOCC.2013.6864048
Publication status	Published - 2013
Event	2013 International SoC Design Conference, ISOCC 2013 - Busan, Korea, Republic of Duration: 17 Nov 2013 → 19 Nov 2013

Publication series

Name	ISOCC 2013 - 2013 International SoC Design Conference

Conference

Conference	2013 International SoC Design Conference, ISOCC 2013
Country/Territory	Korea, Republic of
City	Busan
Period	17/11/13 → 19/11/13

Keywords

Switched-line phase shifter
two-bit switched-line phase shifter

Access to Document

10.1109/ISOCC.2013.6864048

Cite this

@inproceedings{aa88ca936d2040479e4c141f24330935,

title = "A 60 GHz switched-line type phase shifter using body-floating switches",

abstract = "In this study, a two-bit switched-line type phase shifter is designed and fabricated for 60 GHz phase array applications. A body-floating technique is used to reduce the insertion loss of the on-state switch while the off-state isolation is increased by the use of a resonating inductor connected across the switch. The size of the delay path in the phase shifter is reduced by adopting a lumped equivalent circuit realization. Measurements demonstrate a minimum insertion loss of 8.2 dB with an average value of 8.9 dB at 60 GHz, with a return loss smaller than 12 dB over the frequency range of 57 to 64 GHz.",

keywords = "Switched-line phase shifter, two-bit switched-line phase shifter",

author = "Gul, \{Muhammad Talha\} and Duong, \{Hao Vinh\} and Kim, \{Seong Yeon\} and Lee, \{Jong Wook\}",

year = "2013",

doi = "10.1109/ISOCC.2013.6864048",

language = "English",

isbn = "9781479911417",

series = "ISOCC 2013 - 2013 International SoC Design Conference",

publisher = "IEEE Computer Society",

pages = "353--355",

booktitle = "ISOCC 2013 - 2013 International SoC Design Conference",

address = "United States",

}

Gul, MT, Duong, HV, Kim, SY & Lee, JW 2013, A 60 GHz switched-line type phase shifter using body-floating switches. in ISOCC 2013 - 2013 International SoC Design Conference., 6864048, ISOCC 2013 - 2013 International SoC Design Conference, IEEE Computer Society, pp. 353-355, 2013 International SoC Design Conference, ISOCC 2013, Busan, Korea, Republic of, 17/11/13. https://doi.org/10.1109/ISOCC.2013.6864048

A 60 GHz switched-line type phase shifter using body-floating switches. / Gul, Muhammad Talha; Duong, Hao Vinh; Kim, Seong Yeon et al.
ISOCC 2013 - 2013 International SoC Design Conference. IEEE Computer Society, 2013. p. 353-355 6864048 (ISOCC 2013 - 2013 International SoC Design Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A 60 GHz switched-line type phase shifter using body-floating switches

AU - Gul, Muhammad Talha

AU - Duong, Hao Vinh

AU - Kim, Seong Yeon

AU - Lee, Jong Wook

PY - 2013

Y1 - 2013

N2 - In this study, a two-bit switched-line type phase shifter is designed and fabricated for 60 GHz phase array applications. A body-floating technique is used to reduce the insertion loss of the on-state switch while the off-state isolation is increased by the use of a resonating inductor connected across the switch. The size of the delay path in the phase shifter is reduced by adopting a lumped equivalent circuit realization. Measurements demonstrate a minimum insertion loss of 8.2 dB with an average value of 8.9 dB at 60 GHz, with a return loss smaller than 12 dB over the frequency range of 57 to 64 GHz.

AB - In this study, a two-bit switched-line type phase shifter is designed and fabricated for 60 GHz phase array applications. A body-floating technique is used to reduce the insertion loss of the on-state switch while the off-state isolation is increased by the use of a resonating inductor connected across the switch. The size of the delay path in the phase shifter is reduced by adopting a lumped equivalent circuit realization. Measurements demonstrate a minimum insertion loss of 8.2 dB with an average value of 8.9 dB at 60 GHz, with a return loss smaller than 12 dB over the frequency range of 57 to 64 GHz.

KW - Switched-line phase shifter

KW - two-bit switched-line phase shifter

UR - https://www.scopus.com/pages/publications/84906898089

U2 - 10.1109/ISOCC.2013.6864048

DO - 10.1109/ISOCC.2013.6864048

M3 - Conference contribution

AN - SCOPUS:84906898089

SN - 9781479911417

T3 - ISOCC 2013 - 2013 International SoC Design Conference

SP - 353

EP - 355

BT - ISOCC 2013 - 2013 International SoC Design Conference

PB - IEEE Computer Society

T2 - 2013 International SoC Design Conference, ISOCC 2013

Y2 - 17 November 2013 through 19 November 2013

ER -

A 60 GHz switched-line type phase shifter using body-floating switches

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this