A study on three dimensional layout design by the simulated annealing method

Seung Ho Jang

doi:10.1007/s12206-008-0217-z

A study on three dimensional layout design by the simulated annealing method

Seung Ho Jang

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

Modern engineered products are becoming increasingly complicated and most consumers prefer compact designs. Layout design plays an important role in many engineered products. The objective of this study is to suggest a method to apply the simulated annealing method to the arbitrarily shaped three-dimensional component layout design problem. The suggested method not only optimizes the packing density but also satisfies constraint conditions among the components. The algorithm and its implementation as suggested in this paper are extendable to other research objectives.

Original language	English
Pages (from-to)	2016-2023
Number of pages	8
Journal	Journal of Mechanical Science and Technology
Volume	22
Issue number	11
DOIs	https://doi.org/10.1007/s12206-008-0217-z
Publication status	Published - Nov 2008

Bibliographical note

Funding Information:
This research was supported by the Kyung Hee University Research Fund in 2003." (KHU-20031150)

Keywords

Algorithm
Constraint condition
Engineering product
Layout design
Three-dimensional component

Access to Document

10.1007/s12206-008-0217-z

Cite this

@article{b1ab060b22a547dbbfa6cf49af36410f,

title = "A study on three dimensional layout design by the simulated annealing method",

abstract = "Modern engineered products are becoming increasingly complicated and most consumers prefer compact designs. Layout design plays an important role in many engineered products. The objective of this study is to suggest a method to apply the simulated annealing method to the arbitrarily shaped three-dimensional component layout design problem. The suggested method not only optimizes the packing density but also satisfies constraint conditions among the components. The algorithm and its implementation as suggested in this paper are extendable to other research objectives.",

keywords = "Algorithm, Constraint condition, Engineering product, Layout design, Three-dimensional component",

author = "Jang, {Seung Ho}",

note = "Funding Information: This research was supported by the Kyung Hee University Research Fund in 2003.{"} (KHU-20031150)",

year = "2008",

month = nov,

doi = "10.1007/s12206-008-0217-z",

language = "English",

volume = "22",

pages = "2016--2023",

journal = "Journal of Mechanical Science and Technology",

issn = "1738-494X",

publisher = "Korean Society of Mechanical Engineers",

number = "11",

}

TY - JOUR

T1 - A study on three dimensional layout design by the simulated annealing method

AU - Jang, Seung Ho

N1 - Funding Information: This research was supported by the Kyung Hee University Research Fund in 2003." (KHU-20031150)

PY - 2008/11

Y1 - 2008/11

N2 - Modern engineered products are becoming increasingly complicated and most consumers prefer compact designs. Layout design plays an important role in many engineered products. The objective of this study is to suggest a method to apply the simulated annealing method to the arbitrarily shaped three-dimensional component layout design problem. The suggested method not only optimizes the packing density but also satisfies constraint conditions among the components. The algorithm and its implementation as suggested in this paper are extendable to other research objectives.

AB - Modern engineered products are becoming increasingly complicated and most consumers prefer compact designs. Layout design plays an important role in many engineered products. The objective of this study is to suggest a method to apply the simulated annealing method to the arbitrarily shaped three-dimensional component layout design problem. The suggested method not only optimizes the packing density but also satisfies constraint conditions among the components. The algorithm and its implementation as suggested in this paper are extendable to other research objectives.

KW - Algorithm

KW - Constraint condition

KW - Engineering product

KW - Layout design

KW - Three-dimensional component

UR - http://www.scopus.com/inward/record.url?scp=64949203248&partnerID=8YFLogxK

U2 - 10.1007/s12206-008-0217-z

DO - 10.1007/s12206-008-0217-z

M3 - Article

AN - SCOPUS:64949203248

SN - 1738-494X

VL - 22

SP - 2016

EP - 2023

JO - Journal of Mechanical Science and Technology

JF - Journal of Mechanical Science and Technology

IS - 11

ER -

A study on three dimensional layout design by the simulated annealing method

Abstract

Bibliographical note

Keywords

Access to Document

Other files and links

Fingerprint

Cite this