Aurivillius-Type SrBi₄Ti₄O₁₅/PGA Composite Film-Based Flexible Triboelectric Nanogenerators for Energy Harvesting/Storage and Multipurpose Tap-Indication Transducer Applications

Recent advancements in flexible triboelectric nanogenerators (TENGs) have widely focused on converting mechanical energy into electrical energy to power small wearable electronic gadgets and sensors. To effectively achieve this, an efficient energy-converted power management circuit is required. Herein, we report on Aurivillius-type strontium bismuth titanate (SrBi₄Ti₄O₁₅) nanoparticles (SBT NPs)-loaded polyglucosamine (PGA) composite film-based flexible TENG to be used for energy harvesting/storage and biomechanical applications. Initially, SBT NPs were synthesized and then, different weight concentrations were loaded into PGA. The TENG devices were fabricated using different wt % composite films (SBT/PGA) and polydimethylsiloxane as positive and negative triboelectric layers, respectively, and aluminum was used as a conductive electrode attached to two tribo films. To evaluate the electrical output from the device, contact-separation operation mode was used. An optimized TENG consisting of 2 wt % SBT/PGA composite film produced the maximum electrical output voltage and current of approximately ∼239 V and ∼7.5 μA, respectively. Efficient TENG energy harvesting and storage circuits have been proposed for storing charges in capacitors and for operating electronic gadgets. The optimized TENG was employed to generate electrical energy from various biomechanical movements. Thereafter, the biodegradability of the composite film was also tested. The fabricated films were completely biodegraded within a few hours. Furthermore, the TENG was utilized as a tap-indication transducer for multipurpose switching applications.