Organic photovoltaic devices with a crosslinkable polymer interlayer

Nam Su Kang; Byeong Kwon Ju; Tae Wan Lee; Dong Hoon Choi; Jae Min Hong; Jae Woong Yu

doi:10.1016/j.solmat.2011.05.044

Organic photovoltaic devices with a crosslinkable polymer interlayer

Nam Su Kang
, Byeong Kwon Ju
, Tae Wan Lee
, Dong Hoon Choi
, Jae Min Hong
, Jae Woong Yu

Research output: Contribution to journal › Article › peer-review

16 Citations (Scopus)

Abstract

Organic photovoltaic devices with a photo-crosslinkable interlayer were fabricated. This photo-crosslinkable interlayer acted as a leakage current reducing buffer layer. The performance of the small area OPV cell (0.04 cm ²) was enhanced by the increase in the short circuit current and the fill factor. When a larger area cell (1 cm²) was used, the performance of OPV cell increased when the appropriate interlayer thickness was used. In the case of a 10 cm×10 cm module, the power conversion efficiency was about double than that without the interlayer. The insertion of the interlayer increased the current extraction by lowering the barrier height and attenuated the fill factor reduction by enhancing the rectification with a better leakage current sealing. From this study, it is clearly proved that the insertion of the appropriate photo-crosslinkable layer improves the performance of OPV devices, the effect was especially evident for large area cells.

Original language	English
Pages (from-to)	2831-2836
Number of pages	6
Journal	Solar Energy Materials and Solar Cells
Volume	95
Issue number	10
DOIs	https://doi.org/10.1016/j.solmat.2011.05.044
Publication status	Published - Oct 2011

Bibliographical note

Funding Information:
This research was supported by a Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology ( 2010-0007122 ) and by the GRRC program of Gyeonggi province (GRRC Kyung Hee 2010-B03).

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Curable interlayer
Current extraction
Fill factor
Organic photovoltaic
Polymer solar cell

Access to Document

10.1016/j.solmat.2011.05.044

Cite this

@article{4c2348c58dd44d1196d66359e3141a4e,

title = "Organic photovoltaic devices with a crosslinkable polymer interlayer",

abstract = "Organic photovoltaic devices with a photo-crosslinkable interlayer were fabricated. This photo-crosslinkable interlayer acted as a leakage current reducing buffer layer. The performance of the small area OPV cell (0.04 cm 2) was enhanced by the increase in the short circuit current and the fill factor. When a larger area cell (1 cm2) was used, the performance of OPV cell increased when the appropriate interlayer thickness was used. In the case of a 10 cm×10 cm module, the power conversion efficiency was about double than that without the interlayer. The insertion of the interlayer increased the current extraction by lowering the barrier height and attenuated the fill factor reduction by enhancing the rectification with a better leakage current sealing. From this study, it is clearly proved that the insertion of the appropriate photo-crosslinkable layer improves the performance of OPV devices, the effect was especially evident for large area cells.",

keywords = "Curable interlayer, Current extraction, Fill factor, Organic photovoltaic, Polymer solar cell",

author = "\{Su Kang\}, Nam and Ju, \{Byeong Kwon\} and \{Wan Lee\}, Tae and Choi, \{Dong Hoon\} and Hong, \{Jae Min\} and Yu, \{Jae Woong\}",

note = "Funding Information: This research was supported by a Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology ( 2010-0007122 ) and by the GRRC program of Gyeonggi province (GRRC Kyung Hee 2010-B03).",

year = "2011",

month = oct,

doi = "10.1016/j.solmat.2011.05.044",

language = "English",

volume = "95",

pages = "2831--2836",

journal = "Solar Energy Materials and Solar Cells",

issn = "0927-0248",

publisher = "Elsevier BV",

number = "10",

}

TY - JOUR

T1 - Organic photovoltaic devices with a crosslinkable polymer interlayer

AU - Su Kang, Nam

AU - Ju, Byeong Kwon

AU - Wan Lee, Tae

AU - Choi, Dong Hoon

AU - Hong, Jae Min

AU - Yu, Jae Woong

N1 - Funding Information: This research was supported by a Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Education, Science and Technology ( 2010-0007122 ) and by the GRRC program of Gyeonggi province (GRRC Kyung Hee 2010-B03).

PY - 2011/10

Y1 - 2011/10

N2 - Organic photovoltaic devices with a photo-crosslinkable interlayer were fabricated. This photo-crosslinkable interlayer acted as a leakage current reducing buffer layer. The performance of the small area OPV cell (0.04 cm 2) was enhanced by the increase in the short circuit current and the fill factor. When a larger area cell (1 cm2) was used, the performance of OPV cell increased when the appropriate interlayer thickness was used. In the case of a 10 cm×10 cm module, the power conversion efficiency was about double than that without the interlayer. The insertion of the interlayer increased the current extraction by lowering the barrier height and attenuated the fill factor reduction by enhancing the rectification with a better leakage current sealing. From this study, it is clearly proved that the insertion of the appropriate photo-crosslinkable layer improves the performance of OPV devices, the effect was especially evident for large area cells.

AB - Organic photovoltaic devices with a photo-crosslinkable interlayer were fabricated. This photo-crosslinkable interlayer acted as a leakage current reducing buffer layer. The performance of the small area OPV cell (0.04 cm 2) was enhanced by the increase in the short circuit current and the fill factor. When a larger area cell (1 cm2) was used, the performance of OPV cell increased when the appropriate interlayer thickness was used. In the case of a 10 cm×10 cm module, the power conversion efficiency was about double than that without the interlayer. The insertion of the interlayer increased the current extraction by lowering the barrier height and attenuated the fill factor reduction by enhancing the rectification with a better leakage current sealing. From this study, it is clearly proved that the insertion of the appropriate photo-crosslinkable layer improves the performance of OPV devices, the effect was especially evident for large area cells.

KW - Curable interlayer

KW - Current extraction

KW - Fill factor

KW - Organic photovoltaic

KW - Polymer solar cell

UR - https://www.scopus.com/pages/publications/79960558025

U2 - 10.1016/j.solmat.2011.05.044

DO - 10.1016/j.solmat.2011.05.044

M3 - Article

AN - SCOPUS:79960558025

SN - 0927-0248

VL - 95

SP - 2831

EP - 2836

JO - Solar Energy Materials and Solar Cells

JF - Solar Energy Materials and Solar Cells

IS - 10

ER -

Organic photovoltaic devices with a crosslinkable polymer interlayer

Abstract

Bibliographical note

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this